PARMA Company Arena Groomers
PARMA® Arena Groomers
The PARMA Arena Groomer has been proven in arenas and on tracks for all events that require good footing. Its ability to prepare your base as well as the top surface in one pass can improve the performance of your horse and save stress on his legs at the same time.
Parma® Arena Groomer
The unit uses vibrating “S” tines that can be set to your desired digging depth to leave a well-prepared base. Following the tines is a leveling bar that will shave off high spots and carry dirt to fill holes as you pass over the arena. To the rear of the machine is a roller that conditions the surface and also gauges the depth of the tines to leave a uniform finish on your arena.
AG513 Arena Groomer
The AG513 is the smallest unit we have, it measures 5ft in width and has 13 S-tines and points. 5 foot wide Mini Arena Groomer has 2 S-tine bars, it’s 52″ long, weighs 300lbs and we suggest that you need an 18-25 HP ATV or tractor to pull it. If you plan to use an ATV, you will also need to order the Tongue with Screwjack.
Arena Groomer AG615
6 ft. mini model – AG615
2 bars with 15 MINI “S-tines” with reversible & replaceable mini chisel points
Tractor Requirements:
20-30 Horsepower (HP)
Tire width no greater than 62″
AG821 Arena Groomer
The AG821 is the considered the standardunit, it measures 8ft in width and has 21 S-tines and points. 8 foot wide Arena Groomer has 3 S-tine bars, it’s 851/2″ long, weighs 800lbs and we suggest that you need an 30-60 HP Tractor to pull it. If your “tractor” does not have a 3-pont hitch, you will need to order the Tongue w/ Screwjack to transport and pull the unit.
